![]() |
Cleanliness Testing![]() |
Materials Analysis![]() |
Failure Testing![]() |
Innovatech Labs, LLC 13805 First Ave. N. Suite 100 Plymouth, MN 55441 Phone (763) 231-0150 Fax (763) 231-0151 Toll free: (888) 740-5227 |
Details of Ion Chromatography (IC)
Material identification - Reference materials are needed Quantification - Concentrations of components can be determined by establishing a standard curve of known concentrations. Sensitivity - detection limits down to part per billion levels.
Sample must be able to go into solution with a solvent compatible to the IC system, or the components of interest must be able to be extracted from the sample. Components of interest must cause a change in the conductivity of the solute to be detected.
Typical analysis time - 1 hour for setup and analysis of one sample, 15-30 minutes for each additional sample Sensitivity achieved is dependent on sample size and matrix
|
"Always give very timely results. Thanks for being a great resource" - Senior Quality Analyst for Adhesives Manufacturer "Helpful, knowledgeable staff. Good, fast results" - Engineer at a Fittings & Couplings Manufacturer
|